If you need a gift for a special person, or just need
some time to unwind, make a creative handicraft. Crafting is
therapeutic when you are feeling stressed, and it also can yield a
useful or decorative item. Everyone has some measure of
creativity, and with modern kits and patterns, a creative handicraft
does not have to end in frustration.
If you have a sewing
machine, you can learn to make a creative handicraft that will be a
useful and welcome gift. Potholders are a great beginning sewing
project that can be made from scrap material or unwanted clothing and a
bit of double-fold bias tape. Here are the simple instructions
for this creative handicraft.
First cut two 8-inch (21 cm.)
squares of fabric to be the front and back of the potholder.
Choose coordinating fabrics that match your kitchen for these
pieces. To make it easier, you can make an 8-inch square pattern
from a piece of cardboard to use as a pattern. Cut more 8-inch
squares of any old fabric to stack for the filling. You want the
stack of fabric squares to be thick enough to protect you from a hot
pot, but thin enough to be flexible and able to be sewn through.
Stack
all layers so that the outer layers are facing to the outside and the
filler layers are inside. You can put a couple of large straight
pins through all layers to keep them together. Now sew right
across the middle of the stack. Sew across the middle again,
perpendicular to the first stitching. You will have divided the
square into 4 squares. Sew across the stack again from corner to
corner, and again from the other corner to corner. The layers
should be joined and sturdy now.
To bind off the raw edges of
your creative handicraft, trim with scissors so that all the layers are
again even at the edges. Open out one folded edge of the
bias tape. The wider bias tape might seem to be easier to use,
but the narrow type makes a neater finished product. Starting at
one corner, line up the edges of the tape with the edges of the
potholder, and start stitching through all layers along the first fold
line, which will be about 1/4 inch from the edge. Stitch neatly
and slowly, attaching the opened tape all around the edge until you
reach the beginning corner. Cut the bias tape off, leaving 3
inches, (7 cm.) to make into a hanging loop.
Fold the
bias tape over the raw edge so that the middle fold lines up with the
outside of the potholder and the other fold is hiding the raw edge of
the bias tape. Now, for best results, hand sew the binding down,
forming a loop on your creative handicraft when you get to the
end.
This potholder is just one example of a creative
handicraft you can create if you have a sewing machine. When it
is finished, you will have a useful item made from all recycled
materials. Feel free to give this creative handicraft away or
keep it for yourself...